Rust-Oleum 7100 Industrial Floor Paint is a solvent based floor paint designed for interior and exterior use on concrete, wood and steel.
Rust-Oleum 7100 industrial floor paint is a solvent based, industrial quality, floor coating paint designed for interior and exterior use on concrete (over 2 years old), timber and steel. It produces a professional gloss appearance with a high film build. Rust-Oleum 7100 has high resistance to abrasion, neutral detergents and is resistant to oils, fuel and petrol etc., for short periods. 7100 floor paint is available in various colours including, blue, yellow and shades of grey. Rust-Oleum floor paints are perfect for use in environments where the condition of the floor needs to be kept damage free.
Rust-Oleum 7100 industrial floor paint is best used for industrial premises, factories around machinery, garages, workshops, showrooms, warehouses, shops, steps, stairways and line markings. This floor paint is perfect for the rejuvenation of any industrial surface. In a working environment where the surface of a floor is very important and needs to be kept in pristine condition.
Rust-Oleum 7100 industrial floor paint should be applied using brush or roller and can be used internally or externally. For a non slip finish apply one coat of 7100 NS industrial floor paint before recoating the floor, after 24 hours, to offer prime anti slip performance. Make sure you apply the Rust-Oleum paint evenly and smoothly to maximise performance and produce a smooth glossy finish.
Surface and Environment
Rust-Oleum 7100 industrial floor paint is perfect for use on a variety of surfaces, including concrete, timber and steel. Particularly for industrial environments where it is important that the surface of the floor is clean and free from contamination. This floor paint has been manufactured to offer a long lasting, protective coating for a variety of industrial floor surfaces. Rust-Oleum floor paint is suitable for use in both commercial and domestic settings.
- Abrasion resistant
- Fuel/oil resistant
|Type:||Solvent Based Alkyd|
RAL 5017, RAL 6011, Transparent, RAL 6005, RAL 1015, RAL 1023, RAL 9005, RAL 7035, RAL 7001, RAL 9010
|Tintable:||Yes, to Pastel Colours. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||456.0g per Litre|
|Volume Solids:||36 - 40%|
|Suitable Substrates:||For interior and exterior concrete floors|
|Application Method:||Brush or Roller|
|Theoretical Coverage:||8 m2 per litre at 50 microns|
|Wet Film Thickness (WFT):||130 microns|
|Dry Film Thickness (DFT):||50 microns|
|Touch Dry:||6 hours at 20°C|
|Overcoatable:||After 24 hours at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Rustoleum CombiColor Thinner 7301|
|Shelf Life:||5 years unopened|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.