Axalta Acothane LV Sealer

Acothane LV Sealer is an ideal primer for concrete and plaster prior to application of an Acothane finishing system. It is also suitable as a saturation coating for concrete.

Best Uses

Acothane LV Sealer is best used for the priming of concrete, plaster etc. prior to application of an Acothane finishing system, or as a saturation coating for concrete.

Application

All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts or other contamination. Remove all laitance and other contaminants by the most appropriate methods, such as blast cleaning. Ensure the concrete is dry to a reading of <16% on the Wood Moisture Equivalent (WME) scale.

Mix only in the proportions stated, mixing each component individually then together using a mechanical agitator. Activator must be added to the base and thoroughly mixed to ensure an even mix throughout the container – at least 2 minutes mixing time is recommended. Care must be taken to avoid unmixed material being left on the sides and bottom of the tin. Decanting mixed material into a plastic container and further mixing is recommended. The plastic container may be recovered for further use when coating has cured. Apply via brush and / or roller.

IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu