Coo-Var Pro-Netic Water Based Magnetic Chalkboard Paint is a dual purpose coating that can produce a surface to which magnets will attach and is also suitable as a chalkboard.
Coo-Var Pro-Netic Magnetic Chalk Board Paint provides a matt black finish which can create a magnetic notice board on suitably prepared wall areas, wooden board and MDF surfaces, test other surfaces before use.Ideal for offices, schools, playgroups, art installations, restaurants, cafes and much more.
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate key is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly. Mix well before use. As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying. Do not paint when temperature will be at or below 7°C during the painting and drying process. Apply direct on to walls and wood. On non ferrous metal use Coo-Var W201 All Metals Primer. Apply a minimum of 3 coats by brush. Do not paint when temperature will be at or below 7°C during the painting and drying process.
For use as a chalkboard: To prime your chalkboard, lay a piece of chalk on its side and cover the entire board liberally with chalk. Rub it in with a dry rag and then erase. Chalkboards are porous, so if you do not prime there is a risk the first markings will be there permanently.
|VOC Content:||30.0g per Litre|
|Suitable Substrates:||For suitably prepared wall areas, wooden board and MDF surfaces, test other surfaces before use|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||10 m2 per litre at 55 microns|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||50 - 55 microns|
|Touch Dry:||30 minutes at 20°C|
|Overcoatable:||After 3 hours at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 2.5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.