Coo-Var Decorative Flake System is a three part decorative floor coating which provides a a hard wearing and attractive floor coating for public areas.
The Coo-Var Decorative Flake floor coating is a three part system, comprising a base colour coat, decorative flakes and a clear (water based) top coat. It provides a hard wearing finish that is aesthetically pleasing.
Coo-Var Decorative Flake System is ideal for use in public areas, where aesthetics are as important as durability. Examples of which include factories, warehouses and large reception areas, etc.
The Decorative Flake System has a three part process of application. The Profloor Plus base coat is applied with a brush or roller. This is followed by the decorative flakes, which are broadcast and finally sealed with the Extra Performance Clear (top) Coat. This top coat is also applied with a brush or roller.
Please note, a primer may be required for some projects. Please contact the Promain office for more information.
Surface and Environment
The Coo-Var Decorative Flake System is suitable for use on Concrete, Plaster, Masonry, Wood and Stable Asphalt. It is suggested for use in areas where a hard-wearing and attractive surface is required.
- Nine available colour/finishes (call 01462 421 333 for more information)
- For interior and exterior use
- Base coat coverage is 17-19 m2 per 5kg pack and is touch dry in 4 hours (full cure is 24 hours)
- Top coat coverage is 20-40 m2 per 5kg pack, 1-2 hour touch dry (Hard dry in 24 hours)
- Base coat has a gloss finish
- Top coat has an off gloss finish
- Decorative Flakes are broadcast manually
- May be slippery when wet
|Type:||Solvent Free Epoxy Floor Paint|
|Stock Colours:||White, Black, Blue, Flint Grey, Forest Green, Poppy Red, Safety Yellow, Sterling Grey, Tile Red and Clear|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|Suitable Substrates:||Concrete, plaster, masonry, wood and stable asphalt|
|Application Method:||Brush or Shortpile Roller|
|Theoretical Coverage:||17 to 20 Sq.m/5 kilo pack @ 180 to 200 microns per coat|
|Wet Film Thickness (WFT):||180 to 200 microns|
|Dry Film Thickness (DFT):||180 to 200 microns|
|Pot Life:||20 to 30 minutes at 20°C - Once the parts are mixed together material has to be used within the time stated|
|Initial Cure:||4 to 8 hours at 20°C|
|Hard Dry:||24 to 36 hours at 20°C|
|Fully Cured:||5 to 7 days at 20°C|
|Overcoating Time:||Minimum 6 hours to Maximuim 48 hours|
|Cleaner / Thinner:||Clean with Thinners 16|
|Packaging:||Available in 5 kg mixed units|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.