Full Product Catalogue

A phosphoric acid based mordant solution for treating galvanised steel. Highways Approved No. 155.

A tough, hard wearing finish coat for application over properly primed surfaces.

A surface tolerant, one pack primer. Compatible with a wide range of International finishes.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A single pack alkyd high gloss finish suitable as a easily maintained cosmetic finish coat on areas above the waterline.

Suitable for thinning paints and equipment cleaning from International Paints.

A two component acrylic polyurethane finish giving excellent durability and long term recoatability.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

For use on a wide variety of substrates including hand prepared rusty steel.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.

A patented technology, high performance, low VOC single pack acrylic polysiloxane finish coat containing no free isocyanates.

A single component, anti corrosive, one coat, rapid drying modified alkyd primer / finish.

A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.

A suitable thinner for various products within the International range.

Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

Provides rapid cure and overcoating even under low temperature conditions.

A single component, water based acrylic finish for use in industrial environments.

An epoxy primer which provides optimised control where thin film application is required.

Biocide-free and designed for application onto the underwater hull.

A low VOC, high solids, high build, two component epoxy coating.

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

A solvent free coating designed for installation onto steel or concrete surfaces.