£9.95 delivery on orders excluding certain products & postcodes *
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.
A quick drying two component epoxy primer for immersed or exposed conditions within a system.
A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.
A light coloured, solvent free, pure epoxy coating for potable water tanks.
A two pack epoxy primer / undercoat / tie coat for internal ship spaces.
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
A 2 pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.
A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.
A tough 2 pack epoxy finish coat For concrete that offers good abrasion and chemical resistance in corrosive environments.
A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
For use on a wide variety of substrates including hand prepared rusty steel.