£7.75 delivery on orders excluding certain products & postcodes *
Graphenstone GrafClean Eggshell Premium has high covering power and is ideal for use on new walls (plasters, renders, dry lining) in high traffic areas e.g., hallways. Also for use on primed woodwork, MDF, interior joinery and metal, plus compatible and previously painted surfaces. GrafClean Eggshell Premium is suitable for both interior and exterior use.
Graphenstone GrafClean Eggshell Premium contains lime which acts as a natural preservative thus eliminating the use of harmful chemicals and/or carcinogenic materials.
Correct preparation is essential before application of GrafClean. Always ensure that the substrate is dry, firm, well adhered, even, and free of any impurities that could hinder the perfect bonding of the product. Remove any organic growth and/or other impurities by thorough cleaning with a suitable product, prior to application of GrafClean.
The actions prior to application of the paint will vary depending on the nature of the surface:
Shake and dilute with water using 10 -15% maximum (this can be less if using on joinery/wood) per litre of product (Approx. 150-200ml water p/L of paint). Mix thoroughly but avoid excessive shaking to minimise bubble occlusion.
The recommended application method is by Roller, Brush or Airless Spray. Apply 2 or 3 coats evenly (sanding in between coats is recommended). Starting at the edges, paint in sections spreading the paint load evenly over the entire surface. Do not paint over areas that are drying. Please note that overcoating may cause micro-cracks.
Components: | Single Pack |
Type: | Emulsion |
Finish: | Eggshell (Semi-matt) |
Stock Colours: | White |
Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | < 1 g/l |
Volume Solids: | 45 ± 5 % |
Suitable Substrates: | Plaster, Render, Dry Lining, Primed Woodwork, MDF, Metal |
Application Method: | Brush, Roller, Airless Spray |
Theoretical Coverage: | 6-8 m2/l (2 coats) |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | - |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 2-4 hours at 25°C |
Overcoatable: | 2-4 hours between coats at 25°C |
Fully Cured: | 30 days at 25°C |
Cleaner / Thinner: | Clean tools after use with warm water |
Shelf Life: | 36 months from date of production unopened |
Packaging: | Available in 1, 4 and 10 Litres |