Graphenstone Nevada Ultra
Graphenstone Nevada Ultra is a natural, low-cost, ecological, professional lime based paint with a matte white finish, which is suitable for interior walls. It is free of all toxic substances and also highly breathable.
Best Uses
Graphenstone Nevada Ultra is an economical, breathable interior matt emulsion for low traffic areas. Also perfect as an obliterating coat over strong colours and for use as an interior mist coat/primer for preparing bare surfaces. Available in White and 6 trade colours.
- Flat matt
- Trace VOCs – less than 0.1%
- Wipeable – Class 2 wet scrub
- Fire rated - B-s1, d0(specification required)
- Perfect for use as a mist coat onto new substrates – gypsum, lime, cement render.
- Cost saving – helps to cover stronger colours prior to painting topcoats
- Excellent coverage – 12-16m2/L with 1 coat
- Colour selection – White and 6 Trade Colours – RAL 9010, 9016, BS 08 B15, BS10 B 15, NCS 1000N, NCS 0603 Y20R
Areas of use: Interior walls & ceilings. Onto new surfaces externally when used as a primer. Domestic and commercial use as a primer.
Application
The substrate must be dry, firm, well adhered, even and free of any impurities that could hinder the perfect bonding of the product. Any organic growth and/or other impurities should be removed by thorough cleaning using specific products for this purpose such as Centrecoat GS36 Fungicidal Wash.
If the substrate shows chipping / bagging of the existing paint, remove the non-adherent areas by scraping and brushing. On glossy paints or putties, clean the surface and sand lightly.
Shake and dilute with water using 10-15% per litre of product (Approx. 150-200ml water per litre of paint). Ensure good mixing. Avoid excessive shaking to minimise bubble occlusion.
Apply 2 or 3 coats evenly. Paint in sections, starting with borders. Without overloading the roller, dip it lightly into the paint to spread evenly. Do not paint over areas that are drying and avoid splices. Please note that an excess of product per coat can generate micro-fissures.
Approvals and Certifications
- VOC emissions Class A+
- Relevant to LEED & WELL
Technical Info
| Components: | Single Pack |
| Type: | Lime Based |
| Finish: | Matt |
| Stock Colours: | White |
| Tintable: | Yes, to most Graphenstone house colours, NCS, RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | < 1 g/L |
| Volume Solids: | 69% |
| Suitable Substrates: | Plaster, gypsum, old paint, prefabricated panels, unlaminated wallpaper, brick or perlite. |
| Application Method: | Roller, brush, airless or other type of projection. |
| Theoretical Coverage: |
5-7 m2 per litre (2 coats). However, exact yield depends on type and condition of substrate, as well as tools used. |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | - |
| Induction Time: | - |
| Pot Life: | - |
| Surface Dry: | |
| Overcoatable: | After 2 - 4 hours at 25°C |
| Fully Cured: | |
| Cleaner / Thinner: | Clean tools after use with warm water. |
| Shelf Life: | 36 months in original unopened containers. |
| Packaging: | Available in 4 and 10 Litres |
RELATED PRODUCTS
