
Hempel Hempadur 15600
Hempel Hempadur 15600 is an amine adduct curing pure epoxy coating with excellent adhesion to steel, resistance to crude oil and most refined oil products.
Best Uses
Hempel Hempadur 15600 is recommend for use as a lining for cargo oil tanks of crude oil tankers and sea water ballast tanks. Also suitable as lining for a wide range of cargo tanks of product tankers as well as tank lining for grey / black water, brine,drilling mud, fish (RSW) tanks etc.
- Very high chemical and temperature resistance.
- Application and curing at low temperature.
- Build to minimise turnaround time when switching cargos.
Application
Remove oil, grease and other contaminants by suitable detergent cleaning. Remove salts, detergents and other contaminants by high pressure fresh water cleaning.
New build: Abrasive blasting to min. Sa 2½ (ISO 8501-1) / SP 10 (SSPC). Remove dust, blast media and loose materials.
Maintenance and Repair: Spot abrasive blasting to min. PSa 2½ (ISO 8501-2) / SP 10 (SSPC). Water jetting to Wa 2½ (ISO 8501-4). Minor areas may be hand or power tool cleaned instead of abrasive blasting. Remove dust, blast media and loose materials. Flash rust degree of maximum FR L (ISO 8501-4).
Surface profile Medium (G) (ISO 8503-2). Apply via airless spray.
Approvals and Certifications
- This product is type approved according to PSPC requirementsbased on crossover testing over a wide range of shop primers.Consult Hempel for specific Type Approval Certificates as defined inIMO Resolution: MSC.215(82) MSC.288(87).
- Complies with US FDA and EU food regulations for contact withliquid and dry foodstuff.
Technical Info
| Components: | Two Pack |
| Type: | Amine Adduct Curing Pure Epoxy |
| Stock Colours: | Light grey 11150 |
| Tintable: | No |
| Suitable Substrates: | Tank lining |
| Cleaner / Thinner: | Hempel's Thinner 08450 |
| Shelf Life: | 12 months |
| Packaging: | Available in 20 Litres |
| VOC Content: | 229g per litre |
| Application Method: | Airless Spray |
| Theoretical Coverage: | 4.8 m2 per litre |
| Finish: | Semi Flat |
| Touch Dry: | See datasheet |
| Fully Cured: | See datasheet |
| Volume Solids: | 77 ± 2% |
| Pot Life: | See datasheet |
| Overcoatable: | See datasheet |
| Wet Film Thickness (WFT): | 207 microns |
| Dry Film Thickness (DFT): | 106 microns |
| Induction Time: | See datasheet |


