Jotun Thinner No. 7 is a solvent based thinner designed to improve the flow of a range of Jotun acrylic, vinyl and anti fouling coatings. Can also be used as cleaner for pumps and tools before and after painting.
Jotun Thinner No. 7 is best used with products from the Jotun range, especially acrylic, chlorinated rubber and anti-fouling paint. Thinners No. 7 helps to ensure the correct thickness is applied, when mixed at the correct percentage of approximately 5-10%.
Jotun Thinner No. 7 can be used to clean utensils after use or mixed with the paint prior to use, to ensure the correct thickness. Use a stirring technique to do this.
Surface and Environment
Jotun Thinner No. 7 can be used to clean a variety of brushes or rollers and can be used to clean up paint spillages. Recommended usage as per the specific data sheet or application guide of the product one wish to apply.
|VOC Content:||870.0g per litre|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Cleaner / Thinner:|
|Shelf Life:||48 months|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.