Keim Dolomitspachtel has been specially formulated as a ready to use mineral based filler for use on interior mineral, organic and mixed substrates on wall and ceiling surfaces.
Keim Dolomitspachtel is designed as a full cover filler and will easily touch up defects, filling cracks and joints where there is a need to equalise the surface.
Keim Dolomitspachtel can be applied by hand or machine plasterers float or for smaller applications by filling knife and expected consumption is approx. 1.5 kg per m2 per mm of layer thickness. Precise consumption may very depending upon the substrate being repaired. Keim Spachtel contains a small aggregate varying is size from 0 to 0.5 mm.
All loose, flaking or unstable material must be thoroughly removed prior to use. Supplied ready to use. Apply thinly with a float, and do not exceed a maximum layer thickness of 4mm. Deeper cavities must be filled beforehand. Once the first layer has dried apply a second layer with a float. Keim Dolomitspachtel can be over coated with any Keim mineral interior paint. Ambient and substrate temperature should be between 5° C and 30° C when applying.
For the best finish possible, Promain recommend the use of KEIM's Facade Brush for the best application.
|Type:||Mineral based filler|
|Suitable Substrates:||Mineral, organic and mixed substrates on wall and ceiling surfaces|
|Application Method:||Hand or machine - Airless Sprayer possible|
|Theoretical Coverage:||Approximately 1.8kg/m2 for surface filling per 1mm layer thickness|
|Application Conditions:||Ambient and substrate temperature above 5°C and below 30°C|
|Overcoatable:||Can be overcoated with any Keim mineral interior paint|
|Fully Cured:||Average drying time 8-10 hours at 20°C|
|Cleaner / Thinner:||Clean tools with water immediately after use|
|Shelf Life:||Approx. 12 months if kept dry, cool, but frost-free in tightly closed containers|
|Packaging:||Available in 8 Kg containers|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.