KEIM MX Glaze Clear
Keim MX Glaze is an anti graffiti coating formulated as an engineered siloxane that embodies the properties of both a high performance epoxy and a polyurethane in one coat. General purpose high gloss coating offering good weathering and wear resistance.
Best Uses
KEIM MX Glaze provides a wipeable, durable surface that has good anti graffiti properties for all mineral substrates. Formulated for areas at high risk of graffiti such as external murals, public walls and city premises.
Application
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using Keim MX Glaze may proceed.
Apply a thin and even coat by brush or short pile roller. Add cure to resin and stir thoroughly with mechanical mixer for five minutes. Avoid entrapment of air in the coating which will result in bubbles and blisters. Keim MX Glaze is supplied in the proper mixing proportions of resin and cure.
| Components: | Two Component Set |
| Type: | Siloxane Coating |
| Finish: | Gloss |
| Stock Colours: | Clear |
| Tintable: | Yes, to Keim Exclusive pallet - Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | 8% by weight / 120g/l |
| Volume Solids: | - |
| Suitable Substrates: | All mineral substrates |
| Application Method: | Brush or Short Pile Roller |
| Theoretical Coverage: | Approx. 0.1lt/m2 per coat |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | - |
| Mixing Time: | 5 minutes with a mechanical mixer |
| Pot Life: | 4 hours at 20°C |
| Touch Dry: | 2 hours at 20°C |
| Overcoatable: | - |
| Fully Cured: | 4.5 hours at 20°C |
| Cleaner / Thinner: | Clean tools immediately after use with solvent |
| Shelf Life: | 12 months in tightly closed containers |
| Packaging: | Available in 4.5 Litres (1ltr cure and 3.5ltr resin) |
