Keim Soldalit ME is a sol silicate photocatalytic exterior mineral paint which converts harmful pollutants into harmless nitrates and is environmentally friendly to ISO14001.
Keim Soldalit ME is specially formulated as a durable exterior mineral coating with the added advantage of staying cleaner for longer. Keim Soldalit ME has titanium dioxide added as a catalyst enabling a photocatalytic reaction which converts harmful pollutants into harmless nitrates. This breakdown of organic material and contaminants will reduce the build-up of dirt and grime on exterior surfaces caused by pollution from road traffic and industry. Bacteria and fungal spores are also significantly reduced, keeping treated surfaces looking cleaner for longer. The photocatalytic reaction produced by Soldalit ME has been formulated to last the lifetime of the paint. Soldalit ME is also UV stable meaning that colours will not fade.
Offers water repellency, vapour permeability and forms a chemical crystalline bond with the substrate. Keim Soldalit ME is made using pure inorganic mineral fillers, earth oxide colour pigments, potassium silicate and silica sol binders.
A range of colours is available, please call for prices and availability on 01462 421 333.
Keim Soldalit ME is a highly specialised mineral paint system based on a binding agent combination of silica sol and potassium silicate, for use on exterior surfaces where a mineral matt finish is required. This combination allows the application of mineral coatings not only onto mineral, but also on a variety of previously painted surfaces directly without the use of any stabilising agents. Keim Soldalit ME is particularly suitable for restoration on repaired and stripped substrates.
Keim Soldalit ME can be applied undiluted by paint brush, roller or airless spray onto thoroughly cleaned and dry surfaces. A minimum of two coats is recommended allowing at least 12 hours between coats.
We recommend using Keim Facade Brush with this product to get the best finish possible.
Surface and Environment
Keim Soldalit ME is an exterior environmentally friendly, ISO14001 coating suitable for application onto all mineral, absorbent exterior surfaces. Soldalit ME is particularly suitable as a restoration coating to repaired and stripped surfaces and previously painted surfaces.
- Vapour permeability
- Produced from pure inorganic mineral fillers
- Earth oxide colour pigments
- Potassium silicate and silica sol binders
- UV and acid resistant
- Highly water repellent
- High weathering resistance
- Resists algal and fungal growth
- Resistant to harmful pollutants
- Environmentally friendly, ISO14001
- Durable and environmentally friendly
- UV stable fade free colours
|Type:||Sol silicate photocatalytic exterior mineral paint|
|Tintable:||Yes. In accordance with the KEIM Exclusiv and KEIM Avantgarde swatches. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||No VOC's|
|Suitable Substrates:||All mineral, absorbent surfaces, suitable for application onto previously painted surfaces|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||Approx. 0.45kg/m2 KEIM Soldalit ME for two coats|
|Waiting Time:||Minimum period of 12 hours between coats|
|Application Conditions:||Ambient and substrate temperature above 5°C and below 30°C.|
|Cleaner / Thinner:||Clean tools with water immediately after use|
|Shelf Life:||Approx. 12 months, if kept cool but frost free in tightly closed containers|
|Packaging:||Available in 5 Kg and 25 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.