Keim Restauro Top is a mineral dry bagged pre mixed restoration mortar with hydraulic binders used for professional stone repair.
The Keim Restauro system consists of natural stone replacement materials for reproducing the colour and texture of the original stone. Keim Restauro Top can be used to restore stone surfaces on its own or as part of the Keim Restauro Stone Restoration system.
- Easy to apply
- Can be colour matched to the stone
- Long lasting
Remove loose material and old coats mechanically or with a water pressure jet. Keim Restauro Top should be mixed only with clean cold water, approximately 5lt per 30kg. For larger quantities use stirring machine or mixer. After a ripening period of 5 minutes the mortar should be of moist earth consistency. For moulding silicate resin moulds should be used. Apply to pre-wetted surfaces in one or more layers from 10mm to 30mm maximum. Keim Restauro Top can be applied proud of the
surface using a trowel, allowed to harden and then dressed back in a manner to suit the surrounding stonework. If necessary stainless steel reinforcements, screws and wires can be used to hold repair materials in place until the mortar is dry.
- Bulk density: approx. 1.40g/cm3
- Water consumption: 0.13 – 0.16l/kg
- Compressive strength: approx. 10N/mm2
- Bending tensile strength: approx. 4.1N/mm2
- Modulus of elasticity: approx. 9.0KN/mm2
|Type:||Mineral Dry Restoration Mortar|
|Stock Colours:||Available in KEIM's Natural Stone Colour shades|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|Suitable Substrates:||Stone Surfaces|
|Theoretical Coverage:||Approximately 10kg/m2 for 5mm thick repair|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Processing Time:||Max 45min|
|Setting Time:||Approximately 5 hours|
|Cleaner / Thinner:||Clean tools immediately after use with water|
|Shelf Life:||Approx. 6 months in tightly closed container|
|Packaging:||Available in 30 Kg bags|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.