NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

Carboline Carboguard 891 VOC
An ultra high solids epoxy that is designed as a liner for potable water. FDA approved.

From £675.00 £562.50
Carboline Carbozinc 11
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

From £257.04 £214.20
Carboline Carbomastic 18 FC
A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

From £106.20 £88.50
Carboline Phenoline 353 LT
A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.

From £313.80 £261.50
Carboline Carboguard 890 GF
A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.

From £132.30 £110.25
International Intertherm 3070
Formulated specifically to provide corrosion protection for the subsea market.

From £773.83 £644.86
International Interzinc 52E
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

From £347.63 £289.69
Jotun Jotamastic 87 GF Wintergrade
A two component protective coating for use in high traffic, atmospheric and immersed environments.

From £356.18 £296.82
Jotun Hardtop One
A single pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.

From £210.88 £175.73
Jotun Jotamastic Smart Pack HB
A two component surface tolerant, high solids, high build coating. NORSOK approved.

From £141.70 £118.08
PPG SigmaZinc 68 GP
A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.

From £267.84 £223.20
PPG SigmaTherm 540 Moisture Cure Silicone
Formally Amercoat 878 a one component heat resistant moisture curing silicone aluminium.

From £152.88 £127.40
Hempel Hempadur Quattro 17634
A universal epoxy and self-primed high performance coating system.

From £191.24 £159.37
International Interzone 3507
A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.

From £349.30 £291.08

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)