NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

International Intershield 300
A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.

From £398.16 £331.80
Hempel Hempadur 35560 - WRAS Approved
Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.

From £361.90 £301.58
International Intercure 200HS
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

From £377.92 £314.93
International Interfine 878
A tough, hard wearing finish coat for application over properly primed surfaces.

From £375.62 £313.02
International Interzinc 52E
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

From £419.76 £349.80
Jotun Penguard Pro
A universal, all round, new construction coating. Used as primer, mid coat, finish coat or as single coat system.

From £363.65 £303.04
Jotun Resist 86
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

From £368.05 £306.71
Jotun Tankguard DW
A 2 pack solvent free amine cured epoxy coating. It is specially designed for potable drinking water tanks.

From £384.76 £320.63
PPG PSX 700 Engineered Siloxane
For steel from PPG Sigma, Ameron. Highways Approved Item No.185.

From £373.15 £310.96
PPG SigmaShield 880 GF - Formerly Amerlock 880GF
A 2 part surface tolerant high solid glass flake epoxy coating. For use in offshore splash zone maintenance.

From £424.12 £353.43
PPG SigmaTherm 230 Phenolic Epoxy
A 2 pack high build heat resistant phenolic epoxy coating for use under insulation systems. Protects up to 230°C.

From £457.20 £381.00

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)