Rustoleum Primer 44 HS

SKU
id610
UN1263 (Class: 3, Pk Grp: III)
Ideal for Corrugated Fibre Asbestos roofs to improves the adherence of topcoats such as Rustoleum Dacfill or Rustoleum Dacfill HZ.
Available in 5 and 20 Litres in Grey
From £60.71 £50.59
In stock
Only %1 left
Product Description

Rustoleum Mathys Primer 44 is ideal for Corrugated Fibre Asbestos roofs and porous concrete. It improves the adherence of topcoats such as Rustoleum Dacfill or Rustoleum Dacfill HZ.

Solvent based fixing primer based on chlorinated rubber offering excellent fixing capacity, good UV resistance and flexibility on porous, unpainted mineral substrates. Rustoleum Mathys Primer 44 is ideal for Corrugated Fibre Asbestos roofs and porous concrete. It improves the adherence of topcoats such as Rustoleum Dacfill or Rustoleum Dacfill HZ.

Best Uses

Rustoleum 44 HS Primer is best used as an impregnating flat roof primer and for corrugate fibre asbestos roofs. One hour after application 44 HS Primer will be water and rain resistant. Offering you excellent flexibility without cracking and solid UV resistance.

Application

Rustoleum Mathys Primer 44 HS can be applied by paint brush or airless paint spray. This flat roof primer is touch dry within one hour and ready to recoat after 24 hours. After a further 24 hours the coat will reach full hardness. Rustoleum 44 HS Primer should be applied in a dry and well ventilated area.

Surface/Environment

Rustoleum Mathys Primer 44 is ideal for Corrugated Fibre Asbestos roofs and porous concrete. Please not Primer 44 should only be applied to a bone dry surface.

Technical Details
  • Rustoleum Mathys Primer 44 is ideal for Corrugated Fibre Asbestos roofs and porous concrete, offering high UV resistance and ialso offers 400% flexibility
  • It is rain resistant after one hour at 20 Degrees C.
Components: Single Pack
Type: Solvent Based
Finish: Gloss
Stock Colours: Grey
Tintable: No
VOC Content: 599 g/l
Volume Solids: 32%
Suitable Substrates: Fixation layer for porous and unpainted mineral substrates
Application Method: Brush, Roller, Air Atomised Spray or Airless Spray
Theoretical Coverage: 5-10 m2 per litre
Wet Film Thickness (WFT): 70 microns
Dry Film Thickness (DFT): 23 microns
Induction Time: -
Pot Life: -
Touch Dry: 1 hour at 20°C
Overcoatable: After 24 hours at 20°C
Fully Cured: 24 hours at 20°C
Cleaner / Thinner: Thinner 22
Shelf Life: 2 years
Packaging: Available in 1, 5 or 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use