*Rust-Oleum Mathys Pegaprim Xpress Primer
Please note, this product is now discontinued. Contact our technical team for a suitable alternative.
Rustoleum Mathys Pegaprim Xpress Primer is designed for use inside and outside to offer excellent adhesion to metal and porous substrates such as, concrete, wood, fibreboards, masonry and plaster rendering.
Rustoleum Mathys Pegaprim Xpress Primer is part of Promain's fantastic anti graffiti paint range that works well to block stains and provide a protective coating that obliterates tar, soot and graffiti. Rustoleum Mathys Pegaprim Xpress Primer offers users excellent drying time of just 30 minutes and can be recoated after just 1 hour.
Best Uses
Rustoleum Mathys Pegaprim Xpress Primer is best used as a protective undercoat that can be used with any topcoat, and solidifies and adheres to most surfaces including, metal, PVC, plastic and wood. Rustoleum Mathys Pegaprim Xpress Primer works as a strong, stain block paint that can act as an anti graffiti paint primer. Pegaprim Xpress offers excellent adhesion to metal (steel, zinc, aluminium, galvanised steel) and on smooth hard surfaces (PVC, polyester, Formica). Closes porous substrates such as masonry and plaster rendering.
Application
Rustoleum Mathys Pegaprim Xpress Primer is available in white and dries to a satin gloss finish with a theoretical coverage rate of 10m2 per litre per coat. This coverage rate will go down on more porous surfaces.
Surface and Environment
Rustoleum Mathys Pegaprim Xpress Primer is designed for use inside and outside to offer excellent adhesion to metal and porous substrates such as, concrete, wood, fibreboards, masonry and plaster rendering.
| Components: | One Part |
| Type: | Universal adhesion primer based on water borne acrylic resins |
| Finish: | Satin |
| Stock Colours: | 1 White |
| Tintable: | No |
| VOC Content: | 40.0g per Litre |
| Volume Solids: | 39% |
| Suitable Substrates: | For inside and outside. Adhesion on metal (steel, zinc, aluminium, galvanised steel) and on smooth hard surfaces (PVC, polyester, Formica). Closes porous substrates (masonry, plaster rendering, concrete, wood, fibreboards). |
| Application Method: | Brush, Roller, Air Atomised Spray or Airless Spray |
| Theoretical Coverage: | 10 m2 per litre |
| Wet Film Thickness (WFT): | 100 microns |
| Dry Film Thickness (DFT): | 40 microns |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 30 minutes at 20°C |
| Overcoatable: | After 1 hour at 20°C |
| Fully Cured: | 2 days at 20°C |
| Cleaner / Thinner: | Water |
| Shelf Life: | 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C. |
| Packaging: | Available in 5 Litres |