Rustoleum Mathys Paracem Deco Matt

SKU
id21158
Non Hazardous
A high quality, decorative matt interior wall and ceiling paint.
Available in 4 and 10 Litres. Tintable to a huge range of colours.
From £36.06 £30.05
In stock
Only %1 left
Product Description

Rustoleum Mathys Paracem Deco Matt is a high quality, decorative matt interior wall and ceiling paint.

Best Uses

Rustoleum Mathys Paracem Deco Matt is a decorative and matt finishing for indoor walls and ceilings. Applicable on most substrates (plaster, bricks, concrete, etc.) as well in private as in public buildings.

  • Excellent flow
  • Good mechanical resistance against rubbing
  • Smooth mat aspect
  • High covering power
  • Tendency not to overlap

Application

Old cleaned layers in good condition and light porous substrates may be recoated directly with Paracem Deco. Very porous substrates, smooth plaster and water-resistant platerboard are to be impregnated first with a coat of the 1/1 mixture Rustoleum Pegafix + Rustoleum Paracem Deco with a consumptioin of 12 m2 per litre per coat.

Nicotine stains must be isolated first with Rustoleum Pegaprim Isofix, Rustoleum Pegamat Aqua or Rustoleum Pegamat RL. Old damp spots must be isolated with Rustoleum Pegamat RL or Rustoleum Pegaprim Isofix. Unpainted woodwork must be treated appropriately first and a priming coat must be applied (e.g. Rustoleum Fassiprim or Rustoleum Pegaprim Xpress). Metal objects without rust spots are to be pre-treated with Rustoleum Pegalink, Rustoleum Pegaprim Xpress or Rustoleum Galvaprim.

On glass fibre, apply preferably first a coat of Rustoleum Paracem Deco Soft or Rustoleum Paracem Deco Satin before finishing with a coat of Paracem Deco.

To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

Technical Details
Components: Single Pack
Type: Water Based
Finish: Matt
Stock Colours: 1 White
Tintable: Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 30 g/L
Volume Solids: 33 - 35%
Suitable Substrates: For internal walls and ceilings
Application Method: Brush, Roller, Air Spray or Airless Spray
Theoretical Coverage: 7 - 10 m2 per litre per coat
Wet Film Thickness (WFT): 140 microns
Dry Film Thickness (DFT): 50 microns
Induction Time: -
Pot Life: -
Touch Dry: 30 minutes at 20°C
Overcoatable: 1 hour minimum at 20°C
Fully Cured: 2 days at 20°C
Cleaner / Thinner: Water
Shelf Life: 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Packaging: Available in 4 and 10 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use