Please note, this product is now discontinued. Contact our technical team for a suitable alternative on 01462 421333.
Rustoleum Secco Super has been specifically designed for use on brick, stone, concrete and cement to provide surfaces with ultra resistance to water penetration.
Rustoleum Mathys Secco Super Brick Sealer is a hydrophobing polysiloxane, solvent-based coating. Used on external unpainted masonry and concrete to eliminate water penetration to walls and also concrete roof tile. Secco Super Brick Sealer is used as a Clear Sealant on Walls that will not change the substrate colour and has a matt finish.
Secco Super Brick Sealer is best used as a treatment of porous walls. Secco Super coats the walls surface with a clear sealant, all the while allowing it to breathe. This product repels water excellently to provide walls with the ultimate protection.
Secco Super Brick Sealer should be applied using brush, roller or airless spray. Using Airless Spray will offer faster coverage than a standard roller. At the same time using a Roller will offer faster coverage than by brush. It is always handy to have a brush ready for the trickier areas that spray and rollers will not cover. Always make sure surfaces are dry, clean and free from contaminants before application is started.
Rustoleum Mathys Secco Super has been specifically designed for use on brick, stone, concrete and cement to provide surfaces with ultra resistance to water penetration.
- Vapour permeable (allows the substrate to breathe)
- Secco Super does not change the substrate colour
|Type:||Water repellent product based on polysiloxanes|
|VOC Content:||790.0g per Litre|
|Suitable Substrates:||For water repellent treatment of porous walls (bricks, concrete, cement, etc.)|
|Application Method:||Brush, Woolen Long Haired Roller|
|Theoretical Coverage:||1 - 4 m2 per litre|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Cleaner / Thinner:||White Spirit|
|Shelf Life:||2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5°C and 35°C.|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.