Sika Primer 204 N

SKU
id17385
UN1866 (Class: 3, Pk Grp: II)
A moisture curing primer for consistent and durable adhesion between Sika Liquid Plastics roof waterproofing systems and metal.
Available in 250ml in boxes of 6
£128.40 £107.00
In stock
Product Description

Sika Primer 204 N is a moisture curing primer for consistent and durable adhesion between Sika Liquid Plastics roof waterproofing systems and metal.

Best Uses

Sika Primer 204 N is used as a bonding agent to promote adhesion of Sika Liquid Plastics liquid applied membranes on metals like steel, stainless steel, galvanized steel, aluminium and anodized aluminium. However, Sika Primer 204 N is not suitable as an anti-corrosion paint.

Sika Primer 204 N is:

  • Excellent adhesion to metal substrates
  • Single Pack - no mixing required
  • Fast drying and curing
  • Resealable - reduces waste

Application

Surfaces must be clean, dry and free from grease, oil and dust. Adhesion on substrates may be improved by scuffing the surface with an abrasive hand pad (very fine grade), wiping down with Sika Cleaner 205 and leaving to flash off. Test with actual substrates and conditions to ensure adhesion and material compatibility.

Sika Primer 204 N has a maximum spread rate of 50ml - 150ml per m2 depending on substrate porosity.

Shake the can of Sika Primer 204 N very thoroughly until mixing ball rattles freely. Continue shaking for another minute and apply a thin but covering coat with a brush, felt pad or foam application. Ideal application and surface temperature is between 15 - 25°C. Tightly reseal container after use.

Technical Details
Components: One Part
Type: Pigmented, solvent-based adhesion promoter
Finish: -
Stock Colours: Yellow
Tintable: No
VOC Content: -
Volume Solids: -
Suitable Substrates: For metal surfaces such as steel, stainless steel, galvanized steel, aluminium and anodized aluminium prior to coating with Sika Liquid Plastics liquid applied mebranes
Application Method: Brush, Felt Pad or Foam Applicator
Theoretical Coverage: Maximum spread rate of 50ml - 150ml per m2 depending on substrate porosity.
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Flash Off: 10 minutes if above 15°C
Overcoatable: -
Fully Cured: -
Cleaner / Thinner: -
Shelf Life: 9 months expected if protected from frost and stored in original, unopened, undamaged sealed packaging in dry conditions away from direct sunlight.
Packaging: Available in 250ml in boxes of 6

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use