Sika Sikafloor ProSeal Pro

Cures, hardens and seals fresh or hardened concrete.

Available in 25 and 200 Litres. Please call for a quote on 200 Litres.

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£322.00

Inc VAT £386.40

PRODUCT DETAILS

Sikafloor ProSeal Pro is a curing compound for concrete new and existing concrete floors and helps to control dust.

Sikafloor ProSeal Pro is a one component, low odour, clear acrylic, resin polymer solution. It is used to cure, harden and seal fresh or hardened concrete. Helping to control dust, it is suitable for new and existing concrete floor surfaces.

Best Uses

Sikafloor ProSeal Pro is used for curing and sealing fresh concrete floors. It is suitable for exterior and interior applications.

Application

Apply Sikafloor ProSeal Pro in one coat with a spray or roller. All dust, loose or friable material must be removed, preferably by brush and/or vacuum, before application.

Surface and Environment

Sikafloor ProSeal Pro is a clear liquid which retains this appearance when cured. Sika Sikafloor ProSeal Pro is non-yellowing and effectively cures and seals concrete surfaces in a single coat.

TECHNICAL

Notes

Easy application process
Single coat application
Mix with an electric stirrer on low speed

Technical Info

Components:	One Part
Type:	Acrylic resin polymer solution
Finish:
Stock Colours:	Clear Liquid
Tintable:	No
VOC Content:
Volume Solids:
Suitable Substrates:	For curing and sealing of fresh concrete floors
Application Method:	Low Pressure Spray
Theoretical Coverage:	0.1 - 0.2 Litres per m2 per coat. (5 - 10 m2/l/coat) To conform with ASTM C-309, ensure a total of 0.2 l/m2 is applied. This figure is theoretical and does not include for any additional material required due to surface porosity, surface profile, variations in level and wastage, etc.
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time:	-
Pot Life:	-
Foot Traffic:	Approx 8 hours at 20°C
Overcoatable:
Fully Cured:	20 hours at 20°C
Cleaner / Thinner:	Clean all tools and application equipment with Sika Thinner C immediately after use
Shelf Life:	12 months
Packaging:	Available in 25 and 200 Litres (please call for a quote on 200L)