Please note, this product is now discontinued. It has now been superseded by Sika Sikafloor 381.
Sika Sikafloor-390 is a two part flexible and chemically resistant epoxy coating for concrete and screed surfaces.
Sikafloor-390 has a high level of chemical resistance, is liquid proof and provides protection against water contaminating liquids. It is easy to use whether it is for crack-bridging or as a chemically resistant coating for concrete and screed surfaces.
Sikafloor-390 is used for crack bridging and to provide a chemically resistant coating for concrete and bund areas. Sikafloor-390 is liquid proof and provides protection against water contaminating liquids.
Sikafloor-390 is applied by serrated trowel and spiked roller. After suitable preparation of the substrate, the product should be mechanically mixed. It is also imperative that moisture content, humidity and dew point are taken into consideration. Please read the application instructions on the Product Data Sheet for essential information.
Surface and Environment
Concrete substrates should be mechanically prepared with an abrasive blast cleaner or scarifying equipment. All dust and loose material should be removed with a brush or vacuum.
Sika Sikafloor 390 is used within the following Sika systems:
- Sikafloor MultiDur EB-39 ECF
- Sikafloor MultiDur ET-39 V
- Sikafloor MultiDur ES-39
See Data Sheets tab for System sheet downloadable PDF.
- High chemical resistance
- Suitable for crack-bridging
- Water protection system
- Available in a choice of colour shades
- Application: Serrated trowel and spiked roller
- Cleaner: Thinner C
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.