Teknos Teknol Aqua 1410-01 Wood Preservative is an aqueous industrial wood preservative for new untreated wood designated for exterior use on wooden cladding and / or windows and doors.
Teknos Teknol Aqua 1410-01 Wood Preservative is an aqueous industrial wood preservative for new untreated wood designated for exterior use (hazard class 3) as defined in BS/EN 335-1:1994. Teknos Teknol Aqua 1410-01 Wood Preservative is ideal for protecting wooden cladding or windows and doors.
Teknos Teknol Aqua 1410-01 Wood Preservative protects the wood surface and the treated area against wood destroying and wood discolouring fungi. Teknos Teknol Aqua 1410-01 Wood Preservative satisfies the performance requirements of EN 599-1. After use, your exterior wooden windows and doors become more dimensional stable.
Teknos Teknol Aqua 1410-01 Wood Preservative also minimizes patchiness in subsequent translucent surface treatments within a Teknos system.
The wood must be clean and free from wood dust and contamination. The moisture content of windows and doors should be approx 13% and should not exceed 15%. Cladding moisture content should be approx 18%. Apply via brush, dipping or flow coating procedure, or manual or automated spraying. Please follow the instructions on the label.
The product is delivered ready for use. Stir the product well before use. Treated parts must always be protected with a topcoat treatment before they are exposed to the influence of the weather.
|Softwood 3 Layers
Translucent / Opaque
|All Wood Species 4 Layers
Translucent / Opaque
|Wood Preservative||Teknos Teknol Aqua 1410||Teknos Teknol Aqua 1410|
|Primer||Teknos Aqua Primer 2900||
Teknos Aqua Primer 2900Teknos Aqua Primer 3130
|Intermediate||Teknos Aqua Filler 6500|
|Topcoat||Teknos Aquatop 2600||Teknos Aquatop 2600|
|VOC Content:||10 g/L|
|Suitable Substrates:||For exterior wooden cladding, doors and window frames|
|Application Method:||Brush, dipping or flow coating procedure, or manual or automated spraying.|
|Theoretical Coverage:||May vary according to wood quality and application method|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Dry to Handle:||1 - 2 hours at 20°C|
|Overcoatable:||Between 2 - 3 hours at 20°C|
|Cleaner / Thinner:||Clean equipment with water|
|Shelf Life:||The product must be stored at temperatures above 5°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use. Store away from foodstuffs..|
|Packaging:||Available in 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.