Thermoguard Safeceiling Onecoat Ultra Matt White
Thermoguard Safeceiling Onecoat Ultra Matt White is a decorative fire upgrade and finish in one coat.
Best Uses
Thermoguard Safeceiling Onecoat Ultra Matt White is formulated to protect bare and painted ceilings coated with a combination of acrylic and vinyl types of paint to achieve BS EN Class B and old Class O. These results achieved at UKAS approved Fire Test Laboratory.
Thermoguard Safeceiling Onecoat Ultra Matt White can be used as part of a system to achieve 30 or 60 minute Fire Resistance after specification for additional coats. The finished system provides a smooth aesthetically pleasing matt finishes for internal ceilings.
For walls see Thermoguard Safewall Systems. This product is suitable for ceilings only.
How it works: Onecoat Ceiling Fire Paint expands in a fire to create a resilient insulating barrier.
Application
Substrates must be clean dry and firmly adhered. Ensure good ventilation. Do not apply while condensation could occur during drying. Apply 1 good coat applied at 10 sqm per litre over White and Off White colours. Apply using a woven short pile roller sleeve or synthetic brush. Onecoat must be clean and fully hard dry before application of additional coats.
Ensure coverage is applied as per can i.e., 20 sqm can covers 20 sqm.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
Approvals & Certifications
- FIRE TEST STANDARDS in UKAS and EOTA - accredited Fire Test laboratory BS EN Class B s1 d0 (old Class 0 compliant) over multiple layers and combinations of waterbased painted surfaces identified as low/medium risk.
- Once the works are complete, a project and area specific Certificate available after due diligence on request.
Technical Info
| Components: | One Part |
| Type: | Water based |
| Finish: | |
| Stock Colours: | White |
| Tintable: | Tintable on request. Please note, bespoke tints are non-refundable / exchangeable. |
| VOC Content: | 140.0g per Litre |
| Volume Solids: | |
| Suitable Substrates: | Ceilings Only |
| Application Method: | Brush, Roller, Spray |
| Theoretical Coverage: | Follow on can guide to coverage, do not overspread as this compromises the system and results in non-compliance and inability to certify. |
| Wet Film Thickness (WFT): | |
| Dry Film Thickness (DFT): | |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 1 hour at 20°C |
| Overcoatable: | 4 hours at 20°C |
| Fully Cured: | |
| Cleaner / Thinner: | Clean up with water |
| Shelf Life: | See container |
| Packaging: | Available in 25, 50 and 100m2 tins |
