Full Product Catalogue

For new unpainted zinc coated/galvanized sheet-iron and steel surfaces.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

A high quality acrylic line marking paint. Superb for interior walkways and other health and safety markings.

A tough, hard wearing finish coat for application over properly primed surfaces.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A 2 pack, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A two component epoxy sealer coat, pigmented with micaceous iron oxide.

A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

A low VOC, high solids, high build, two component epoxy coating.

Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.

A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

A low VOC, 2 pack, internally flexibilised, high build, low temperature curing down to -5°C.

A two component, metallic zinc primer for steel in aggressive environments.

A two component epoxy holding primer.

A very high solids, low VOC, 2 pack high build epoxy containing a high level of chemically resistant glass flake.

A high performance, low VOC, water borne 2 pack epoxy with a high gloss finish for structural steel and concrete floors.

A quick drying two component epoxy primer for immersed or exposed conditions within a system.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

A two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining.

For the treatment of weld seams, lap joints & kerb angles.

Suitable for thinning paints and equipment cleaning from International Paints.

Suitable for thinning paints and equipment cleaning from International Paints.

Suitable for thinning paints and equipment cleaning from International Paints.

Suitable for thinning paints and equipment cleaning from International Paints.