Full Product Catalogue

A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.

A 2 pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).

A light coloured, solvent free, pure epoxy coating for potable water tanks.

A two pack epoxy primer / undercoat / tie coat for internal ship spaces.

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.

A highly cross-linked, two component, high build epoxy phenolic coating.

A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.

A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.

A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.

Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

Formulated as a cosmetic finish above water in marine environments. NORSOK approved.

A two pack, tar free, modified epoxy tie coat.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.

A two component, metallic zinc primer for steel in aggressive environments.

A quick drying two component epoxy primer for immersed or exposed conditions within a system.

A two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining.

For the treatment of weld seams, lap joints & kerb angles.

A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.

2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.

A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.

Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.

A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.

A two component, solvent free epoxy which can be applied underwater and will cure underwater.

A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.

A 2 pack, high gloss, low VOC, high solids, fast curing, acrylic polyurethane primer / finish pigmented with zinc phosphate.

A user friendly, low VOC hot spread epoxy repair compound for application onto hand prepared hot steel.

A high build, ‘cold spray’ applied coating, capable of providing corrosion protection.