Full Product Catalogue

A two pack epoxy primer/finish offering corrosion protection in one coat.

Provides rapid cure and overcoating even under low temperature conditions.

A two pack, tar free, modified epoxy tie coat.

A one pack alkyd primer containing zinc phosphate anti-corrosive pigment.

Provides up to two hours cellulosic fire protection on various steel sections exposed in interior environments.

Formulated to provide up to 60 minutes fire protection on internal 'I' sections beams, columns and hollow sections.

A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

A two component primer which is ideal for speeding up production and throughput.

An epoxy primer which provides optimised control where thin film application is required.

A fast curing epoxy primer for use with International 3200 product series.

A pure epoxy primer with anti-corrosive properties and overcoating intervals of up to 6 months.

A two component, anti-corrosive metallic zinc rich epoxy primer.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A two component epoxy sealer coat, pigmented with micaceous iron oxide.

A low VOC, high solids, high build, two component epoxy coating.

Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.

A two component, metallic zinc primer for steel in aggressive environments.

A two component epoxy holding primer.

Suitable for thinning paints and equipment cleaning from International Paints.

A two component, high solids low VOC epoxy micaceous iron oxide.

Provides up to 60 minutes cellulosic fire protection over a wide range of I section beams and columns and hollow sections in interior environments.

A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.

A two pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).

A two pack epoxy primer / undercoat / tie coat for internal ship spaces.