Jotun Primers

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.

An easy to use one component alkyd primer featuring good adhesion properties and surface tolerance.

A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.

A two component surface tolerant, high solids, high build coating. NORSOK approved.

A 1 part alkyd that is fast drying, high build, zinc phosphate pigmented primer / mid coat for atmospheric environments.

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.

A fast drying, 2 part amine cured epoxy zinc phosphate pigmented coating. For exposed structural steel.

A 2 pack amine cured epoxy coating for new construction where short dry to handle and over coating times are required.

A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109

Epoxy shop primer for high-speed welding, reducing weld porosity and back burning.

A shop primer for very high welding and cutting speed, giving reduced weld porosity and back burning.

A 1 part physically drying water borne acrylic coating. A shop primer for high welding and cutting speed.