Mapei Waterproofing | Promain UK

Home
Manufacturers
Mapei
Mapei Waterproofing

Mapei products have been used extensively throughout Europe for many years due to their quality and reliability. Whether it be a joint for a wall to a concrete floor slab, tanking a basement, roof terrace or a balcony, or even a swimming pool, Mapei has a solution. Mapei has formulated rapid-setting fibre-reinforced structural cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete. Mapelastic Turbo has been formulated as a fast drying waterproofing product for concrete structures, cementitious screeds and old floor and wall coverings, allowing for tiling after 4 hours in normal weather conditions and within 24 hours at temperatures down to 5 degrees centigrade. Mapelastic Turbo demonstrates the same resistance to chemical attack from de-icing salts, sulphates, chlorides and carbon dioxide.

Mapei Ultralite S2
A single pack, high-performance, highly-deformable, lightweight cementitious tile adhesive with extended open time and very high yield.

From £54.08 £45.07
Mapei Ultracolor Plus
Ideal for the internal and external grouting of floors and walls in all types of ceramic, terracotta, stone material and glass.

From £21.25 £17.71
Mapei Plastimul
An easy to use general purpose bitumen waterproofing emulsion for cold waterproofing masonry and concrete vertical and sloping surfaces.

From £105.60 £88.00
Mapei Mapelastic Smart
Waterproofing for hydraulic projects like dams and pools.

From £182.89 £152.41
Mapei Elastocolor Waterproof
A protective acrylic waterproof coat. For surfaces which are in permanent contact with water, inc flat roofs and water tanks.

From £345.82 £288.18
Mapei Mapeflex PU45
A 1 pack, rapid hardening, paintable, thixotropic polyurethane sealant and adhesive with a high rate of elasticity.

From £149.70 £124.75
Mapei Antipluviol
A colourless water-repellent impregnator treatment based on silicon compounds in water solution.

From £23.30 £19.42
Mapei Mapelastic Turbo
2 pack, rapid drying elastic cementitious mortar for waterproofing terraces and balconies, even at at low temperature.

From £158.52 £132.10
Mapei Mapelastic Zero
2 pack cementitious mortar, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools.

From £93.54 £77.95
Mapei Mapecrete Creme Protection
Protects the surface of concrete floors or walls against capillary penetration of water.

From £891.00 £742.50
Mapei Antipluviol S
Transparent siloxane resin for rain protection of masonry.

From £246.38 £205.32
Mapei Antipluviol W
A colourless, silane and siloxane-based water repellent impregnator in a watery emulsion.

From £145.34 £121.12
Mapei Mapelastic Foundation
2 pack, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure.

From £192.89 £160.74
Mapei Mapenet 150
Alkali-resistant fiberglass mesh for reinforcing waterproof layers.

From £193.68 £161.40
Mapei Mapefloor I 500W
A 2 pack multi-purpose neutral-coloured epoxy formulate in water dispersion to create vapour-permeable coatings on industrial floors.

From £250.15 £208.46
Mapei Mapeproof Primer
A one component, ready to use dispersion primer which dries rapidly to provide a waterproof surface membrane.

From £132.97 £110.81
Mapei Planiseal 88 - Formerly Idrosilex Pronto
Osmotic cementitious mortar for contact with drinking water, for waterproofing masonry and concrete structures.

From £81.60 £68.00
Mapei Mapeproof 1K Turbo
A 1 pack, solvent free, moisture curing, rapid drying polyurethane membrane, with low VOC's, for waterproofing cementitious screeds.

From £293.21 £244.34

Mapei Mapelastic is a two-component cementitious mortar offering a good degree of flexibility as low as -20 degrees centigrade. Mapelastic is ideally suited for protecting concrete surfaces and structures from environmental attack, as well waterproofing balconies, terraces, bathrooms, showers, terraces, swimming pools and concrete basins used for containing water. Mapelasic is ideal for use over existing floor coverings such as ceramic and porcelain or terracotta, etc. Mapei Idrosilex Pronto is an osmotic cementitious mortar suitable for contact with drinking water, waterproof foundations, walls, cellars, basements, lift-rooms, swimming-pools, canals and reservoirs. Mapei Smooth & Repair R4-class has been formulated from high quality resins and polymers for structural repairs and smoothing over internal and external horizontal and vertical concrete surfaces. Smooth & Repair is suitable for repairing structures exposed to the open air and also in permanent contact with water. The highly thixotropic features allow for easy application on both vertical and overhead surfaces, with no waste and along with very low emission level of volatile organic compounds (VOC) EMICODE EC1 R Plus Mapei repair mortars are offering a greener alternative to many other brands.