NORSOK Approved Paints

Carboline Carbozinc 11
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

From £257.04 £214.20
Carboline Phenoline 353 LT
A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.

From £313.80 £261.50
Carboline Thermaline 440 Topcoat Finish Formerly 400 EU Topcoat
Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

From £180.00 £150.00
Carboline Thermaline 440 Primer Formerly 400 EU Primer
Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.

£188.40 £157.00
Carboline Thermaline 4700 Aluminium
A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.

£89.40 £74.50
Carboline Thermaline 450
Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

From £251.46 £209.55
Carboline Carboguard 891 VOC
An ultra high solids epoxy that is designed as a liner for potable water. FDA approved.

From £675.00 £562.50
Carboline Carbomastic 18 FC
A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

From £106.20 £88.50
Carboline Carboguard 890 GF
A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.

From £132.30 £110.25

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)