Rustoleum 5110 Verti-Patch Lightweight Repair Mortar is a two part epoxy resin repair mortar with special lightweight fillers that will cure granite hard. Rustoleum 5110 Verti-Patch Lightweight Repair Mortar is a concrete repair for walls and floors that won't lift or crack after time as some other conventional concrete repair systems do.
Rustoleum 5110 Verti-Patch Lightweight Repair Mortar is best used for repairing the walls of structures, such as swimming pools. Over a period of time damages can occur causing the potential to harm people, cause accidents as well as looking unappealing on the eye. Use Anglo Epoxy Bond Primer before Rustoleum 5110 Verti-Patch Lightweight Repair Mortar to provide added adhesion, offering a better overall finish.
Surfaces should be clean, dry and free of all loose material. Clean surface by Wire brushing or sweeping with a clean broom. Oil and grease is best removed with dilute Rust-Oleum ND14. A primer is not usually required if patch or crack repairing. 5401 primer is recommended when applying 5110 Verti-Patch as a thin section screed or on very porous substrates.
Rustoleum 5110 Verti-Patch Lightweight Repair Mortar is available in grey or stone colours in 2.5kg packs and can be applied using trowels or scrapers for optimum performance. Rustoleum 5110 Verti-Patch Lightweight Repair Mortar is ultra lightweight and perfect for quick and easy application. Cover, fill and overcoat cracks on concrete walls and floors to make them look new and healthy again.
Rustoleum 5110 Verti-Patch Lightweight Repair Mortar has been designed for use on concrete walls and floors on various different structures, such as swimming pools and can be used for repairing vertical concrete, render and stone. Rustoleum 5110 Verti-Patch Lightweight Repair Mortar can be used indoors and outdoors.
|Type:||Epoxy Repair Mortar|
|Stock Colours:||Grey / Stone|
|VOC Content:||0 g/l|
|Suitable Substrates:||Vertical Concrete, Render and Stone|
|Theoretical Coverage:||0.6 m² per 2.5 kg at a depth of 5 mm|
|Wet Film Thickness (WFT):||2 - 20 mm|
|Dry Film Thickness (DFT):||2 - 20 mm|
|Pot Life:||30 minutes|
|Fully Cured:||12 Hours|
|Cleaner / Thinner:||Rustoleum Thinner 160|
|Shelf Life:||1 year|
|Packaging:||Available in 2.5 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.