Axalta ViterPrime SBR

A single pack alkyd zinc phosphate high build anti-corrosive primer. Can be applied to hand prepared or blast cleaned steel surfaces.

Available in 5 and 20 Litres in various stock colours

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£28.90

Inc VAT £34.68

PRODUCT DETAILS

Axalta ViterPrime SBR is a single pack alkyd zinc phosphate high build anti-corrosive primer. Can be applied to hand prepared or blast cleaned steel surfaces.

Best Uses

Axalta ViterPrime SBR is a tough and durable primer with good adhesion and mechanical properties. Suitable as a general purpose primer for steel with good build properties and hold up on edges.

Tough corrosion inhibiting alkyd primer
May be overcoated with a wide range of finishes

Application

Preparation

New Steelwork: Abrasive blast clean to Sa 2½ BS EN ISO 8501-1: 2007. Surface profile of 50–75 microns. Should blast cleaning be impractical the surface should be prepared to Swedish Visual Standard St 3 taking care to avoid polishing the surface. Surfaces to be painted should be completely dry and free from any contamination likely to affect the performance of the coating.

Mixing

Must be mixed thoroughly by using a mechanical agitator before use. Agitate periodically to ensure paint remains homogeneous.

Application

Suitable for application via airless spray, conventional spray, brush or roller. May be overcoated with itself or other xylene based products after adequate drying time under suitable ambient conditions. The compatibility and suitability of overcoating etc. should be confirmed prior to application.

TECHNICAL

Components:	One Part
Type:	Alyd Zinc Phosphate Primer
Finish:	Matt
Stock Colours:	Red Oxide, Mid Grey, Black, Buff
Tintable:	No
VOC Content:	400.0g per Litre
Volume Solids:	43%
Suitable Substrates:	Hand prepared or blast cleaned steel surfaces
Application Method:	Brush, Roller, Conventional H.V.L.P or Airless Spray
Theoretical Coverage:	4.3 - 5.7 m2 per litre
Wet Film Thickness (WFT):	174 - 233 microns
Dry Film Thickness (DFT):	75 - 100 microns
Induction Time:	-
Pot Life:	-
Dust Free:	35 minutes at 10°C
Overcoatable:	See data sheet
Fully Cured:
Cleaner / Thinner:	Axalta 1050 Thinner (Axalta 1006 for spraying) Equipment Cleaner Axalta 1050 (or Axalta 1006) Thinner
Shelf Life:	Minimum 12 months if stored as above in unopened containers
Packaging:	Available in 5 Litres