Centrecoat Give Way Triangles are a clean cut, preformed, permanent thermoplastic marking highly suitable for use on roads and in car parks.
Supplied ready to use it will adhere to most surfaces in most weather conditions. These logos are manufactured to the highest quality with the best thermoplastic, ensuring a long service life and minimum maintenance.
- Hard wearing.
- Stick to most surfaces.
- ideal for car parks, walkways, cycle lanes and new or reinstatement work on roads.
- Easy to apply.
- Supplied ready to use.
- Optional reflective glass beads to increase visibility at night.
- Use spray tack coat primer when applying to old, worn surfaces.
- Apply with blow torch.
- Dries in minutes.
- Can be driven over once dry.
- Sizes shown in millimetres.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.