Mapei Elastocolor Pittura Paint is a protective and decorative elastic paint based on acrylic resins in water dispersion used to protect the surfaces of concrete and cement renders from aggressive agents present in the atmosphere.
Available in 15,000 colours from the Mapei ColorMap colour system.
Elastocolor Pittura Paint once dried, forms a very elastic film, impermeable to water, but permeable to vapour (micro-porous), and at the same time gives the treated structure a pleasant aesthetic appearance. Due to its elastic characteristics it is suitable for application to Resitex used on Park Homes, Elastocolor protects and waterproofs concrete structures and renders which have hair-line cracks present as it forms a bridge over them with a strong and continuous coat. Use to protect the surfaces of concrete and cement renders from aggressive agents present in the atmosphere. Mapei Elastocolor is available in a vast range of colours that can be obtained with the ColorMap colour system.
Elastocolor Paint is a single component acrylic resin-based paint in water dispersion which forms a film on the surface due to the action of natural light. Once completely dry, Elastocolor Paint forms a flexible finishing coat which is impermeable to water and aggressive agents in the atmosphere (CO2 - SO2), while remaining permeable to vapour. Suitable for anti carbonation use.
Elastocolor Pittura Paint has excellent resistance to ageing, freezing weather conditions and de-icing salts, and the photo-chemical film which forms makes it very difficult for dirt to remain attached to the surface.
Mapei Elastocolor Paint meets the main requirements of EN 1504-9 ('Products and systems for protecting and repairing concrete structures: definitions, requirements, quality control and conformity assessment. General principles for the use and application of systems'),and the requirements of EN 1504-2 ('Protection systems for concrete surfaces') for class: products for protecting surfaces coatings (coating, C) - protection against the risk of penetration (1.3) (protection against ingress, PI) (ZA.1d) + control of humidity (2.2) (moisture control, MC), and increase in resistivity (8.2) (increasing resistivity, IR) (ZA.1e).
Elastocolor is applied by brush, roller or spray in 2 or 3 coats onto perfectly clean and dry substrates which have been previously treated with Elastocolor Primer or Malech depending on the absorbency of the substrate.
- Consumption 200-400 g/m2 per coat
- Very elastomeric
- Impermeable to water
- Permeable to vapour
- Elastocolor is applied by brush, roller or spray
- Available from the ColorMap colour system
- Available in 20 kg buckets.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.