Full Product Catalogue

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

For the treatment of weld seams, lap joints & kerb angles.

For application to steel tank internals.

Suitable for thinning paints and equipment cleaning from International Paints.

Suitable for thinning paints and equipment cleaning from International Paints.

Suitable for thinning paints and equipment cleaning from International Paints.

A two component, high solids low VOC epoxy micaceous iron oxide.

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

This product is now discontinued.

A single pack acid etch primer free from zinc chromate that is ideal for use as a pretreatment primer above water.

A two component, solvent free, chemically resistant, heavy duty epoxy phenolic tank lining.

A single component, water based paint disbonder designed to remove coating residues from metallic substrates.

A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.

Designed for use within certain International Paints to provide a safe anti slip finish to walkways.

A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.

A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C.

A light coloured, solvent free, pure epoxy coating for potable water tanks.

A one pack, alkyd based, high visibility coating for marking on ships. Available in fluorescent orange.

A two pack epoxy primer / undercoat / tie coat for internal ship spaces.

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.

Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.

A single component, fast drying, high build alkyd shop primer that is suitable for mild to moderate corrosive environments.

A highly cross-linked, two component, high build epoxy phenolic coating.

A single component, finish suitable for areas subject to intermediate service temperature that require a coloured finish.

A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.

A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.

A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.