Full Product Catalogue

A low VOC, 2 pack, internally flexibilised, high build, low temperature curing down to -5°C.

A two component, metallic zinc primer for steel in aggressive environments.

A two component epoxy holding primer.

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

A high performance, low VOC, water borne 2 pack epoxy with a high gloss finish for structural steel and concrete floors.

A quick drying two component epoxy primer for immersed or exposed conditions within a system.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

A two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining.

For the treatment of weld seams, lap joints & kerb angles.

For application to steel tank internals.

A two component, high solids low VOC epoxy micaceous iron oxide.

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.

A two component, solvent free, chemically resistant, heavy duty epoxy phenolic tank lining.

2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.

A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.

A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.

A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.

A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C.

A 2 pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).

A light coloured, solvent free, pure epoxy coating for potable water tanks.

A two pack epoxy primer / undercoat / tie coat for internal ship spaces.

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.

Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.

A highly cross-linked, two component, high build epoxy phenolic coating.

A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.

A two component, solvent free epoxy which can be applied underwater and will cure underwater.

A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.