£9.95 delivery on orders excluding certain products & postcodes *
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.
A highly cross-linked, two component, high build epoxy phenolic coating.
A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.
A two component, solvent free epoxy which can be applied underwater and will cure underwater.
A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.
A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.
A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.
A 2 pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.
A low VOC, high solids, rapid cure primer/finish. Excellent anti-corrosive qualities and long term colour / gloss durability.
A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.
A tough 2 pack epoxy finish coat For concrete that offers good abrasion and chemical resistance in corrosive environments.
A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.
A low VOC, 2 pack, internally flexibilised, high build, low temperature curing down to -5°C.
A high performance, low VOC, water borne 2 pack epoxy with a high gloss finish for structural steel and concrete floors.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
A 2 pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).
A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection.
A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. A high quality, cosmetic finish.
A tough, hard wearing finish coat for application over properly primed surfaces.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
For use on a wide variety of substrates including hand prepared rusty steel.
A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.
Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.
A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.