Full Product Catalogue

A two pack, silicone elastomer tie coat for new building or maintenance and repair.

A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. Provides a high quality, cosmetic finish.

A three pack tie coat for use with International Intersleek systems.

A high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating.

Biocide-free and designed for application onto the underwater hull.

A water-based rust remover which is 100% biological degradable and free from toxins.

A single component, water-based rust remover / cleaner gel for a range of substrates.

A two component primer which is ideal for speeding up production and throughput.

An epoxy primer which provides optimised control where thin film application is required.

A fast curing epoxy primer for use with International 3200 product series.

An anti-corrosive which can be applied directly to mechanically prepared shop primer or suitably prepared bare steel.

A pure epoxy primer with anti-corrosive properties and overcoating intervals of up to 6 months.

A single pack alkyd varnish with high gloss and good durability for interior and exterior wood work.

A patented cosmetic finish that provides superior gloss and colour retention on marine projects.

A TBT free anti-fouling from International Paints. Can be applied down to -5°C.

A fast drying, single pack modified acrylic cosmetic finish for above the waterline in marine environments.

A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

For the treatment of weld seams, lap joints & kerb angles.

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.

A new solvent-free epoxy phenolic lining that provides outstanding protection and maximum value.

Intumescent coating for 60 minutes fire resistance to structural steelwork.

A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C.

A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...