£9.95 delivery on orders excluding certain products & postcodes *
A VOC compliant, single component, water based anti-corrosive primer/finish.
Formulated to provide up to 60 minutes fire protection on internal 'I' sections beams, columns and hollow sections.
A water-based rust remover which is 100% biological degradable and free from toxins.
Intumescent coating for 60 minutes fire resistance to structural steelwork.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.
A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.
A low VOC, high solids, rapid cure primer/finish. Excellent anti-corrosive qualities and long term colour / gloss durability.
A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.
A high performance, low VOC, water borne 2 pack epoxy with a high gloss finish for structural steel and concrete floors.
A 2 pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
For use on a wide variety of substrates including hand prepared rusty steel.
A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.
A single component, anti corrosive, one coat, rapid drying modified alkyd primer / finish.
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.
A single component, water based acrylic finish for use in industrial environments.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.
A tough, hard wearing finish coat for application over properly primed surfaces.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.