£9.95 delivery on orders excluding certain products & postcodes *
Intended to provide high corrosion protection, with a rapid cure in a single coat scheme.
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.
A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.
A 2 pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
A tough, hard wearing finish coat for application over properly primed surfaces.
For use on a wide variety of substrates including hand prepared rusty steel.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.
A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.
A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.
A low VOC, 2 pack, internally flexibilised, high build, low temperature curing down to -5°C.
A two component, metallic zinc primer for steel in aggressive environments.
A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.
A quick drying two component epoxy primer for immersed or exposed conditions within a system.
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.
A surface tolerant, one pack primer. Compatible with a wide range of International finishes.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.
A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.
A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.
A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C.