Full Product Catalogue

A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.

A two component, anti-corrosive metallic zinc rich epoxy primer.

A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

A tough, hard wearing finish coat for application over properly primed surfaces.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

A low VOC, two component, internally flexibilised, high build, low temperature curing (down to -5°C), surface tolerant epoxy primer.

A two component, metallic zinc primer for steel in aggressive environments.

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

A quick drying two component epoxy primer for immersed or exposed conditions within a system.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

For application to steel tank internals.

A two component, high solids low VOC epoxy micaceous iron oxide.

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

A surface tolerant, one pack primer. Compatible with a wide range of International finishes.

A two part, chemical and abrasion resistant, glass flake reinforced vinyl ester for the internal lining of chemical storage tanks and vessels.

A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.

A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.

A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.

A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C.

A two pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).

A two pack epoxy primer / undercoat / tie coat for internal ship spaces.