Full Product Catalogue

A versatile, high performance maintenance coating.

A 2 part etch primer suitable for achieving adhesion of polyurethane to all types of aluminium and other metal types where adhesion is problematic.

Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.

A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.

A fast drying product, based on solvent-based epoxy resins that contains rust inhibitive pigments to protect all metal surfaces.

A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.

For use on a wide variety of substrates including hand prepared rusty steel.

A low VOC, two component, internally flexibilised, high build, low temperature curing (down to -5°C), surface tolerant epoxy primer.

A versatile primer for long-term protection of steel in severely corrosive environments.

A highly cross-linked, two component, high build epoxy phenolic coating.

A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.

A two-component epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.

A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.

A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection and low temperature capability....

An anti-corrosive which can be applied directly to mechanically prepared shop primer or suitably prepared bare steel.

For the treatment of weld seams, lap joints & kerb angles.

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.