Please note, this product has now been discontinued. See Rustoleum Mathys Paracem Deco Ultra Clean Xtra Matt as a potential alternative.
Rustoleum Mathys Paracem Deco Ultra Clean is a washable interior wall paint with a matt finish.
Rustoleum Mathys Paracem Deco Ultra Clean is a washable waterborne acrylic interior wall paint with a matt finish. This decorative paint is available in white and in almost every colour, from light to dark tints.
Rustoleum Mathys Paracem Deco Ultra Clean is an ideal finish for the walls of interior rooms that require regular cleaning (e.g. children's rooms, kitchens,...). Suitable for use on most substrates (plaster, bricks, concrete, etc.) in private and in public buildings.
- Excellent cleanbility
- Excellent mechanical resistance against rubbing
- Low dirt pick up
- Easy to apply
- Excellent flow
Old cleaned layers in good condition and light porous substrates may be recoated directly with Paracem Deco Ultra Clean. Very porous substrates, smooth plaster are to be impregnated first with a coat of Rustoleum Paracem Deco Primer, for water-resistant plasterboard use Zinsser Bulls Eye 1-2-3 Plus or Rustoleum Pegaprim Xpress.
Nicotine stains must be isolated first with Rustoleum Pegaprim Isofix, Rustoleum Pegamat Aqua or Rustoleum Pegamat RL. Old damp spots must be isolated with Rustoleum Pegamat RL or Rustoleum Pegaprim Isofix.
Unpainted woodwork must be treated appropriately first and a priming coat must be applied (e.g. Rustoleum Fassiprim or Rustoleum Pegaprim Xpress). Metal objects without rust spots are to be pre-treated with Rustoleum Pegalink, Rustoleum Pegaprim Xpress. On glass fibre, apply preferably first a coat of Rustoleum Paracem Deco Primer before finishing with 2 coats of Paracem Deco Ultra Clean.
|Type:||Water Borne Acrylic|
|Stock Colours:||1 White|
|Tintable:||Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||15 g/L|
|Volume Solids:||49 - 51%|
|Suitable Substrates:||Suitable for use on most internal substrates (plaster, bricks, concrete, etc)|
|Application Method:||Brush or Airless Spray|
|Theoretical Coverage:||7 - 10 m2 per litre per coat|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||50 microns|
|Touch Dry:||30 minutes at 20°C|
|Overcoatable:||After 1 hour at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.|
|Packaging:||Available in 4 and 10 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.