£7.75 delivery on orders excluding certain products & postcodes *
Below we have a range of NATO approved coatings available from Promain.co.uk. As distributors of military approved paint products, Promain distribute coatings from international manufacturers Hempel, International Paints, Jotun and Sherwin Williams. If you require advice on any warship, submarine or sea vessel coatings, contact our technical team on 01462 421333.
For the latest specifications of NATO paints and coatings, visit here to download Warpaint - the UK government's bi-annual technical publication offering advice and guidance on coatings for application to Royal Naval surface ships and submarines.
A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.
A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.
A high solids, 2 pack epoxy brushing and spraying mastic, pigmented with micronised glass flake, aluminium and anti corrosives.
A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
A highly durable, silicone alkyd high gloss finish designed for external marine superstructures.
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.
A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.
A 3 part, high solids, surface tolerant, abrasion resistant anti-corrosive epoxy coating with a selected blend of fused aluminium oxide.
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
A high performance, low VOC, water borne two component epoxy with a high gloss finish for use on structural steel and concrete floors.
An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.
A 2 pack zinc phosphate epoxy wet blast primer for application to surfaces which have been prepared by wet abrasive blasting.