NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

PPG SigmaCover 410 MIO
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.

From £324.00 £270.00
Hempel Hempadur 35560 - WRAS Approved
Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.

From £387.55 £322.96
Jotun Jotamastic 87 Aluminium
A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.

From £83.80 £69.83
Jotun Barrier
A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109

From £139.32 £116.10
Jotun Penguard Tie Coat 100
Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.

£263.36 £219.47
Jotun Barrier 80
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

£285.77 £238.14
Jotun Jotamastic 90 WG Wintergrade
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

From £73.73 £61.44
Hempel Hempadur 4774D
A self-priming, two-component, high-build, pure epoxy paint.

From £287.09 £239.24
Hempel Hempadur 15570
Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.

From £50.95 £42.46
Hempel Hempadur Mastic 45880
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.

From £63.74 £53.12
Jotun Jotamastic 90
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

From £80.28 £66.90
Jotun Penguard Primer
A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

From £60.65 £50.54

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)