Tensid PROSOCO Heavy Duty Detergent

For cleaning heavily stained masonry surfaces and maintenance of surfaces protected with ProSoCo Tile and Masonry Protector or SLX100.

Available in 15 Litres

3. Select a Qty

As low as:

£91.80

Inc VAT £110.16

PRODUCT DETAILS

Tensid PROSOCO Heavy Duty Detergent is a concentrated formula designed for cleaning heavily stained masonry surfaces and maintenance of surfaces protected with ProSoCo Tile and Masonry Protector or SLX100.

Best Uses

This non acidic detergent is ideal for interior or exterior applications and will not normally affect polished surfaces.

Removes heavy stains and soiling from masonry surfaces
Non acidic
Safe for interior and exterior cleaning

Application

Pretesting
Always test each type of surface and stain before overall application to ensure suitability and desired results. Apply test area according to the following application procedures.

Dilutions
Heavy Duty Detergent may be diluted 1 part concentrate and up to 2 parts water for general applications. Concentrated solutions may be used in areas of extremely heavy staining.

Application Instructions

Pre wet the surface with clean water.
Apply prepared Heavy Duty Detergent with a soft bristled brush
Allow to stand on the surface for up to 30 minutes. Do not allow the material to dry on the surface. If drying begins to occur, mist the surface lightly with clean water
Before rinsing, gently scrub the surface until soiling is removed
Rinse with clean water. If using a sponge or string mop, change rinse water frequently. Pressure water rinsing may improve results but is not required

TECHNICAL

Available in 15 Litres

Always test prior to use. Consumption recommended as follows:

Architectural (Smooth) - 1.5 – 3.5m2 per litre
Concrete (Split Faced) - 1.5 – 3.5m2 per litre
Block (Burnished, Ribbed) - 1.5 – 3.5m2 per litre
Marble* (Polished) - 2.5 – 4.5m2 per litre
Travertine* (Unpolished) - 2.5 – 4.5m2 per litre
Limestone* (Unpolished) - 2.5 – 4.5m2 per litre
Granite (Polished) - 2.5 – 4.5m2 per litre
Granite (Unpolished) - 2.5 – 4.5m2 per litre
Sandstone* (Unpolished) - 2 – 3.5m2 per litre
Slate (Unpolished) - 2 – 3.5m2 per litre
Fired Clay (Brick, Tile, Terracotta, Pavers) - 2 – 4.5m2 per litre
Concrete (Block, Brick, Tile, Precast, Panels, Pavers, Cast in place) - 1.5 – 3.5m2 per litre