Full Product Catalogue

A two component acrylic polyurethane finish giving excellent durability and long term recoatability.

A 2 pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

A low VOC, high solids, rapid cure primer/finish. Excellent anti-corrosive qualities and long term colour / gloss durability.

A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two part, high solids, low VOC epoxy micaceous iron oxide intermediate coating.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

A tough, hard wearing finish coat for application over properly primed surfaces.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A two component epoxy sealer coat, pigmented with micaceous iron oxide.

A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

A low VOC, high solids, high build, two component epoxy coating.

A tough 2 pack epoxy finish coat For concrete that offers good abrasion and chemical resistance in corrosive environments.

Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

A low VOC, 2 pack, internally flexibilised, high build, low temperature curing down to -5°C.

A two component epoxy holding primer.

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

A high performance, low VOC, water borne 2 pack epoxy with a high gloss finish for structural steel and concrete floors.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

For application to steel tank internals.

A two component, high solids low VOC epoxy micaceous iron oxide.

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

A two component, solvent free, chemically resistant, heavy duty epoxy phenolic tank lining.

A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.