£9.95 delivery on orders excluding certain products & postcodes *
A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.
A tough, hard wearing finish coat for application over properly primed surfaces.
A tough 2 pack epoxy finish coat For concrete that offers good abrasion and chemical resistance in corrosive environments.
Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.
A two component, metallic zinc primer for steel in aggressive environments.
A two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.
A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.
A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.
A solvent free coating designed for installation onto steel or concrete surfaces.
For use on tanks or other steel structures, trenches, pits, secondary containment & floors, where chemical resistance is the primary concern.
A flake filled vinyl ester coating offering outstanding chemical resistance and a quick return to service.
Intended to provide high corrosion protection, with a rapid cure in a single coat scheme.
A 2 pack, high gloss, low VOC, high solids, fast curing, acrylic polyurethane primer / finish pigmented with zinc phosphate.
A quick drying two component epoxy primer for immersed or exposed conditions within a system.
A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.
A two component, solvent free epoxy which can be applied underwater and will cure underwater.
Reinforced coating to provide tank bottom refurbishment with a 14 hour return to service.
A high volume solids, 2 pack catalysed epoxy, capable of being applied up to 3000 microns DFT on marine decks.
A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection.
A two component product giving excellent durability and long term recoatability.
A high build, ‘cold spray’ applied coating, capable of providing corrosion protection.