Full Product Catalogue

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A tough, hard wearing finish coat for application over properly primed surfaces.

A tough 2 pack epoxy finish coat For concrete that offers good abrasion and chemical resistance in corrosive environments.

Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.

A two component epoxy holding primer.

A primer for vinyl ester schemes over both steel and concrete.

A two pack, tar free, modified epoxy tie coat.

A two component, metallic zinc primer for steel in aggressive environments.

A two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining.

2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.

A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.

A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.

A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.

A solvent free coating designed for installation onto steel or concrete surfaces.

For use on tanks or other steel structures, trenches, pits, secondary containment & floors, where chemical resistance is the primary concern.

A flake filled vinyl ester coating offering outstanding chemical resistance and a quick return to service.

Intended to provide high corrosion protection, with a rapid cure in a single coat scheme.

A 2 pack, high gloss, low VOC, high solids, fast curing, acrylic polyurethane primer / finish pigmented with zinc phosphate.

A quick drying two component epoxy primer for immersed or exposed conditions within a system.

A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.

A two component, solvent free epoxy which can be applied underwater and will cure underwater.

Reinforced coating to provide tank bottom refurbishment with a 14 hour return to service.

A high volume solids, 2 pack catalysed epoxy, capable of being applied up to 3000 microns DFT on marine decks.

A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection.

A two component product giving excellent durability and long term recoatability.

A high build, ‘cold spray’ applied coating, capable of providing corrosion protection.

A solvent free, water based primer for correctly prepared steel.